You are viewing documentation for Kubernetes version: v1.19
Kubernetes v1.19 documentation is no longer actively maintained. The version you are currently viewing is a static snapshot. For up-to-date documentation, see the latest version.
Configure a Pod to Use a ConfigMap
ConfigMaps allow you to decouple configuration artifacts from image content to keep containerized applications portable. This page provides a series of usage examples demonstrating how to create ConfigMaps and configure Pods using data stored in ConfigMaps.
Before you begin
You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:
To check the version, enterkubectl version.Create a ConfigMap
You can use either kubectl create configmap or a ConfigMap generator in kustomization.yaml to create a ConfigMap. Note that kubectl starts to support kustomization.yaml since 1.14.
Create a ConfigMap Using kubectl create configmap
Use the kubectl create configmap command to create ConfigMaps from directories, files, or literal values:
kubectl create configmap <map-name> <data-source>
where <map-name> is the name you want to assign to the ConfigMap and <data-source> is the directory, file, or literal value to draw the data from. The name of a ConfigMap object must be a valid DNS subdomain name.
When you are creating a ConfigMap based on a file, the key in the <data-source> defaults to the basename of the file, and the value defaults to the file content.
You can use kubectl describe or
kubectl get to retrieve information
about a ConfigMap.
Create ConfigMaps from directories
You can use kubectl create configmap to create a ConfigMap from multiple files in the same directory. When you are creating a ConfigMap based on a directory, kubectl identifies files whose basename is a valid key in the directory and packages each of those files into the new ConfigMap. Any directory entries except regular files are ignored (e.g. subdirectories, symlinks, devices, pipes, etc).
For example:
# Create the local directory
mkdir -p configure-pod-container/configmap/
# Download the sample files into `configure-pod-container/configmap/` directory
wget https://kubernetes.io/examples/configmap/game.properties -O configure-pod-container/configmap/game.properties
wget https://kubernetes.io/examples/configmap/ui.properties -O configure-pod-container/configmap/ui.properties
# Create the configmap
kubectl create configmap game-config --from-file=configure-pod-container/configmap/
The above command packages each file, in this case, game.properties and ui.properties in the configure-pod-container/configmap/ directory into the game-config ConfigMap. You can display details of the ConfigMap using the following command:
kubectl describe configmaps game-config
The output is similar to this:
Name: game-config
Namespace: default
Labels: <none>
Annotations: <none>
Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
ui.properties:
----
color.good=purple
color.bad=yellow
allow.textmode=true
how.nice.to.look=fairlyNice
The game.properties and ui.properties files in the configure-pod-container/configmap/ directory are represented in the data section of the ConfigMap.
kubectl get configmaps game-config -o yaml
The output is similar to this:
apiVersion: v1
kind: ConfigMap
metadata:
creationTimestamp: 2016-02-18T18:52:05Z
name: game-config
namespace: default
resourceVersion: "516"
uid: b4952dc3-d670-11e5-8cd0-68f728db1985
data:
game.properties: |
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
ui.properties: |
color.good=purple
color.bad=yellow
allow.textmode=true
how.nice.to.look=fairlyNice
Create ConfigMaps from files
You can use kubectl create configmap to create a ConfigMap from an individual file, or from multiple files.
For example,
kubectl create configmap game-config-2 --from-file=configure-pod-container/configmap/game.properties
would produce the following ConfigMap:
kubectl describe configmaps game-config-2
where the output is similar to this:
Name: game-config-2
Namespace: default
Labels: <none>
Annotations: <none>
Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
You can pass in the --from-file argument multiple times to create a ConfigMap from multiple data sources.
kubectl create configmap game-config-2 --from-file=configure-pod-container/configmap/game.properties --from-file=configure-pod-container/configmap/ui.properties
You can display details of the game-config-2 ConfigMap using the following command:
kubectl describe configmaps game-config-2
The output is similar to this:
Name: game-config-2
Namespace: default
Labels: <none>
Annotations: <none>
Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
ui.properties:
----
color.good=purple
color.bad=yellow
allow.textmode=true
how.nice.to.look=fairlyNice
Use the option --from-env-file to create a ConfigMap from an env-file, for example:
# Env-files contain a list of environment variables.
# These syntax rules apply:
# Each line in an env file has to be in VAR=VAL format.
# Lines beginning with # (i.e. comments) are ignored.
# Blank lines are ignored.
# There is no special handling of quotation marks (i.e. they will be part of the ConfigMap value)).
# Download the sample files into `configure-pod-container/configmap/` directory
wget https://kubernetes.io/examples/configmap/game-env-file.properties -O configure-pod-container/configmap/game-env-file.properties
# The env-file `game-env-file.properties` looks like below
cat configure-pod-container/configmap/game-env-file.properties
enemies=aliens
lives=3
allowed="true"
# This comment and the empty line above it are ignored
kubectl create configmap game-config-env-file \
--from-env-file=configure-pod-container/configmap/game-env-file.properties
would produce the following ConfigMap:
kubectl get configmap game-config-env-file -o yaml
where the output is similar to this:
apiVersion: v1
kind: ConfigMap
metadata:
creationTimestamp: 2017-12-27T18:36:28Z
name: game-config-env-file
namespace: default
resourceVersion: "809965"
uid: d9d1ca5b-eb34-11e7-887b-42010a8002b8
data:
allowed: '"true"'
enemies: aliens
lives: "3"
Caution: When passing--from-env-filemultiple times to create a ConfigMap from multiple data sources, only the last env-file is used.
The behavior of passing --from-env-file multiple times is demonstrated by:
# Download the sample files into `configure-pod-container/configmap/` directory
wget https://kubernetes.io/examples/configmap/ui-env-file.properties -O configure-pod-container/configmap/ui-env-file.properties
# Create the configmap
kubectl create configmap config-multi-env-files \
--from-env-file=configure-pod-container/configmap/game-env-file.properties \
--from-env-file=configure-pod-container/configmap/ui-env-file.properties
would produce the following ConfigMap:
kubectl get configmap config-multi-env-files -o yaml
where the output is similar to this:
apiVersion: v1
kind: ConfigMap
metadata:
creationTimestamp: 2017-12-27T18:38:34Z
name: config-multi-env-files
namespace: default
resourceVersion: "810136"
uid: 252c4572-eb35-11e7-887b-42010a8002b8
data:
color: purple
how: fairlyNice
textmode: "true"
Define the key to use when creating a ConfigMap from a file
You can define a key other than the file name to use in the data section of your ConfigMap when using the --from-file argument:
kubectl create configmap game-config-3 --from-file=<my-key-name>=<path-to-file>
where <my-key-name> is the key you want to use in the ConfigMap and <path-to-file> is the location of the data source file you want the key to represent.
For example:
kubectl create configmap game-config-3 --from-file=game-special-key=configure-pod-container/configmap/game.properties
would produce the following ConfigMap:
kubectl get configmaps game-config-3 -o yaml
where the output is similar to this:
apiVersion: v1
kind: ConfigMap
metadata:
creationTimestamp: 2016-02-18T18:54:22Z
name: game-config-3
namespace: default
resourceVersion: "530"
uid: 05f8da22-d671-11e5-8cd0-68f728db1985
data:
game-special-key: |
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
Create ConfigMaps from literal values
You can use kubectl create configmap with the --from-literal argument to define a literal value from the command line:
kubectl create configmap special-config --from-literal=special.how=very --from-literal=special.type=charm
You can pass in multiple key-value pairs. Each pair provided on the command line is represented as a separate entry in the data section of the ConfigMap.
kubectl get configmaps special-config -o yaml
The output is similar to this:
apiVersion: v1
kind: ConfigMap
metadata:
creationTimestamp: 2016-02-18T19:14:38Z
name: special-config
namespace: default
resourceVersion: "651"
uid: dadce046-d673-11e5-8cd0-68f728db1985
data:
special.how: very
special.type: charm
Create a ConfigMap from generator
kubectl supports kustomization.yaml since 1.14.
You can also create a ConfigMap from generators and then apply it to create the object on
the Apiserver. The generators
should be specified in a kustomization.yaml inside a directory.
Generate ConfigMaps from files
For example, to generate a ConfigMap from files configure-pod-container/configmap/game.properties
# Create a kustomization.yaml file with ConfigMapGenerator
cat <<EOF >./kustomization.yaml
configMapGenerator:
- name: game-config-4
files:
- configure-pod-container/configmap/game.properties
EOF
Apply the kustomization directory to create the ConfigMap object.
kubectl apply -k .
configmap/game-config-4-m9dm2f92bt created
You can check that the ConfigMap was created like this:
kubectl get configmap
NAME DATA AGE
game-config-4-m9dm2f92bt 1 37s
kubectl describe configmaps/game-config-4-m9dm2f92bt
Name: game-config-4-m9dm2f92bt
Namespace: default
Labels: <none>
Annotations: kubectl.kubernetes.io/last-applied-configuration:
{"apiVersion":"v1","data":{"game.properties":"enemies=aliens\nlives=3\nenemies.cheat=true\nenemies.cheat.level=noGoodRotten\nsecret.code.p...
Data
====
game.properties:
----
enemies=aliens
lives=3
enemies.cheat=true
enemies.cheat.level=noGoodRotten
secret.code.passphrase=UUDDLRLRBABAS
secret.code.allowed=true
secret.code.lives=30
Events: <none>
Note that the generated ConfigMap name has a suffix appended by hashing the contents. This ensures that a new ConfigMap is generated each time the content is modified.
Define the key to use when generating a ConfigMap from a file
You can define a key other than the file name to use in the ConfigMap generator.
For example, to generate a ConfigMap from files configure-pod-container/configmap/game.properties
with the key game-special-key
# Create a kustomization.yaml file with ConfigMapGenerator
cat <<EOF >./kustomization.yaml
configMapGenerator:
- name: game-config-5
files:
- game-special-key=configure-pod-container/configmap/game.properties
EOF
Apply the kustomization directory to create the ConfigMap object.
kubectl apply -k .
configmap/game-config-5-m67dt67794 created
Generate ConfigMaps from Literals
To generate a ConfigMap from literals special.type=charm and special.how=very,
you can specify the ConfigMap generator in kustomization.yaml as
# Create a kustomization.yaml file with ConfigMapGenerator
cat <<EOF >./kustomization.yaml
configMapGenerator:
- name: special-config-2
literals:
- special.how=very
- special.type=charm
EOF
Apply the kustomization directory to create the ConfigMap object.
kubectl apply -k .
configmap/special-config-2-c92b5mmcf2 created
Define container environment variables using ConfigMap data
Define a container environment variable with data from a single ConfigMap
Define an environment variable as a key-value pair in a ConfigMap:
kubectl create configmap special-config --from-literal=special.how=veryAssign the
special.howvalue defined in the ConfigMap to theSPECIAL_LEVEL_KEYenvironment variable in the Pod specification.
apiVersion: v1
kind: Pod
metadata:
name: dapi-test-pod
spec:
containers:
- name: test-container
image: k8s.gcr.io/busybox
command: [ "/bin/sh", "-c", "env" ]
env:
# Define the environment variable
- name: SPECIAL_LEVEL_KEY
valueFrom:
configMapKeyRef:
# The ConfigMap containing the value you want to assign to SPECIAL_LEVEL_KEY
name: special-config
# Specify the key associated with the value
key: special.how
restartPolicy: Never
Create the Pod:
kubectl create -f https://kubernetes.io/examples/pods/pod-single-configmap-env-variable.yaml
Now, the Pod's output includes environment variable SPECIAL_LEVEL_KEY=very.
Define container environment variables with data from multiple ConfigMaps
As with the previous example, create the ConfigMaps first.
apiVersion: v1 kind: ConfigMap metadata: name: special-config namespace: default data: special.how: very --- apiVersion: v1 kind: ConfigMap metadata: name: env-config namespace: default data: log_level: INFOCreate the ConfigMap:
kubectl create -f https://kubernetes.io/examples/configmap/configmaps.yaml
Define the environment variables in the Pod specification.
apiVersion: v1 kind: Pod metadata: name: dapi-test-pod spec: containers: - name: test-container image: k8s.gcr.io/busybox command: [ "/bin/sh", "-c", "env" ] env: - name: SPECIAL_LEVEL_KEY valueFrom: configMapKeyRef: name: special-config key: special.how - name: LOG_LEVEL valueFrom: configMapKeyRef: name: env-config key: log_level restartPolicy: NeverCreate the Pod:
kubectl create -f https://kubernetes.io/examples/pods/pod-multiple-configmap-env-variable.yaml
Now, the Pod's output includes environment variables SPECIAL_LEVEL_KEY=very and LOG_LEVEL=INFO.
Configure all key-value pairs in a ConfigMap as container environment variables
Note: This functionality is available in Kubernetes v1.6 and later.
Create a ConfigMap containing multiple key-value pairs.
apiVersion: v1 kind: ConfigMap metadata: name: special-config namespace: default data: SPECIAL_LEVEL: very SPECIAL_TYPE: charmCreate the ConfigMap:
kubectl create -f https://kubernetes.io/examples/configmap/configmap-multikeys.yaml
- Use
envFromto define all of the ConfigMap's data as container environment variables. The key from the ConfigMap becomes the environment variable name in the Pod.
apiVersion: v1
kind: Pod
metadata:
name: dapi-test-pod
spec:
containers:
- name: test-container
image: k8s.gcr.io/busybox
command: [ "/bin/sh", "-c", "env" ]
envFrom:
- configMapRef:
name: special-config
restartPolicy: Never
Create the Pod:
kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-envFrom.yaml
Now, the Pod's output includes environment variables SPECIAL_LEVEL=very and SPECIAL_TYPE=charm.
Use ConfigMap-defined environment variables in Pod commands
You can use ConfigMap-defined environment variables in the command and args of a container using the $(VAR_NAME) Kubernetes substitution syntax.
For example, the following Pod specification
apiVersion: v1
kind: Pod
metadata:
name: dapi-test-pod
spec:
containers:
- name: test-container
image: k8s.gcr.io/busybox
command: [ "/bin/echo", "$(SPECIAL_LEVEL_KEY) $(SPECIAL_TYPE_KEY)" ]
env:
- name: SPECIAL_LEVEL_KEY
valueFrom:
configMapKeyRef:
name: special-config
key: SPECIAL_LEVEL
- name: SPECIAL_TYPE_KEY
valueFrom:
configMapKeyRef:
name: special-config
key: SPECIAL_TYPE
restartPolicy: Never
created by running
kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-env-var-valueFrom.yaml
produces the following output in the test-container container:
very charm
Add ConfigMap data to a Volume
As explained in Create ConfigMaps from files, when you create a ConfigMap using --from-file, the filename becomes a key stored in the data section of the ConfigMap. The file contents become the key's value.
The examples in this section refer to a ConfigMap named special-config, shown below.
apiVersion: v1
kind: ConfigMap
metadata:
name: special-config
namespace: default
data:
SPECIAL_LEVEL: very
SPECIAL_TYPE: charm
Create the ConfigMap:
kubectl create -f https://kubernetes.io/examples/configmap/configmap-multikeys.yaml
Populate a Volume with data stored in a ConfigMap
Add the ConfigMap name under the volumes section of the Pod specification.
This adds the ConfigMap data to the directory specified as volumeMounts.mountPath (in this case, /etc/config).
The command section lists directory files with names that match the keys in ConfigMap.
apiVersion: v1
kind: Pod
metadata:
name: dapi-test-pod
spec:
containers:
- name: test-container
image: k8s.gcr.io/busybox
command: [ "/bin/sh", "-c", "ls /etc/config/" ]
volumeMounts:
- name: config-volume
mountPath: /etc/config
volumes:
- name: config-volume
configMap:
# Provide the name of the ConfigMap containing the files you want
# to add to the container
name: special-config
restartPolicy: Never
Create the Pod:
kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-volume.yaml
When the pod runs, the command ls /etc/config/ produces the output below:
SPECIAL_LEVEL
SPECIAL_TYPE
Caution: If there are some files in the/etc/config/directory, they will be deleted.
Note: Text data is exposed as files using the UTF-8 character encoding. To use some other character encoding, use binaryData.
Add ConfigMap data to a specific path in the Volume
Use the path field to specify the desired file path for specific ConfigMap items.
In this case, the SPECIAL_LEVEL item will be mounted in the config-volume volume at /etc/config/keys.
apiVersion: v1
kind: Pod
metadata:
name: dapi-test-pod
spec:
containers:
- name: test-container
image: k8s.gcr.io/busybox
command: [ "/bin/sh","-c","cat /etc/config/keys" ]
volumeMounts:
- name: config-volume
mountPath: /etc/config
volumes:
- name: config-volume
configMap:
name: special-config
items:
- key: SPECIAL_LEVEL
path: keys
restartPolicy: Never
Create the Pod:
kubectl create -f https://kubernetes.io/examples/pods/pod-configmap-volume-specific-key.yaml
When the pod runs, the command cat /etc/config/keys produces the output below:
very
Caution: Like before, all previous files in the/etc/config/directory will be deleted.
Project keys to specific paths and file permissions
You can project keys to specific paths and specific permissions on a per-file basis. The Secrets user guide explains the syntax.
Mounted ConfigMaps are updated automatically
When a ConfigMap already being consumed in a volume is updated, projected keys are eventually updated as well. Kubelet is checking whether the mounted ConfigMap is fresh on every periodic sync. However, it is using its local ttl-based cache for getting the current value of the ConfigMap. As a result, the total delay from the moment when the ConfigMap is updated to the moment when new keys are projected to the pod can be as long as kubelet sync period (1 minute by default) + ttl of ConfigMaps cache (1 minute by default) in kubelet. You can trigger an immediate refresh by updating one of the pod's annotations.
Note: A container using a ConfigMap as a subPath volume will not receive ConfigMap updates.
Understanding ConfigMaps and Pods
The ConfigMap API resource stores configuration data as key-value pairs. The data can be consumed in pods or provide the configurations for system components such as controllers. ConfigMap is similar to Secrets, but provides a means of working with strings that don't contain sensitive information. Users and system components alike can store configuration data in ConfigMap.
Note: ConfigMaps should reference properties files, not replace them. Think of the ConfigMap as representing something similar to the Linux/etcdirectory and its contents. For example, if you create a Kubernetes Volume from a ConfigMap, each data item in the ConfigMap is represented by an individual file in the volume.
The ConfigMap's data field contains the configuration data. As shown in the example below, this can be simple -- like individual properties defined using --from-literal -- or complex -- like configuration files or JSON blobs defined using --from-file.
apiVersion: v1
kind: ConfigMap
metadata:
creationTimestamp: 2016-02-18T19:14:38Z
name: example-config
namespace: default
data:
# example of a simple property defined using --from-literal
example.property.1: hello
example.property.2: world
# example of a complex property defined using --from-file
example.property.file: |-
property.1=value-1
property.2=value-2
property.3=value-3
Restrictions
You must create a ConfigMap before referencing it in a Pod specification (unless you mark the ConfigMap as "optional"). If you reference a ConfigMap that doesn't exist, the Pod won't start. Likewise, references to keys that don't exist in the ConfigMap will prevent the pod from starting.
If you use
envFromto define environment variables from ConfigMaps, keys that are considered invalid will be skipped. The pod will be allowed to start, but the invalid names will be recorded in the event log (InvalidVariableNames). The log message lists each skipped key. For example:kubectl get eventsThe output is similar to this:
LASTSEEN FIRSTSEEN COUNT NAME KIND SUBOBJECT TYPE REASON SOURCE MESSAGE 0s 0s 1 dapi-test-pod Pod Warning InvalidEnvironmentVariableNames {kubelet, 127.0.0.1} Keys [1badkey, 2alsobad] from the EnvFrom configMap default/myconfig were skipped since they are considered invalid environment variable names.ConfigMaps reside in a specific Namespace. A ConfigMap can only be referenced by pods residing in the same namespace.
You can't use ConfigMaps for static pods, because the Kubelet does not support this.
What's next
- Follow a real world example of Configuring Redis using a ConfigMap.